December 12, 2022
When it’s time to resurface your pool, call (352) 735-4878 for reliable, expert service from Clements Pool Services.
Swimming pools mean a lot of responsibility, whether you buy a house with a pool or install one yourself. It’s about more than just the weekly cleaning and chemical checks—you also need to be aware of your pool’s surface along the walls and floor.
So how often should you resurface a pool? The answer depends on your pool surface material and its condition.
Not sure whether it’s time to look for pool resurfacing services in Eustis? Let’s look at the signs you may need to resurface your pool.
How Often to Resurface Your Pool
Over time, minerals and wear and tear and stain or crack your pool. Temperature fluctuations and exposure to the elements can lead to deteriorating plaster, rust, and other issues that affect the look of your pool and your safety when using it.
Resurfacing covers all stains, cracks, and imperfections to create a uniform, durable pool surface.
But how often should you resurface a pool? That’s a complicated issue because it varies depending on your surfacing material:
- Resurface plaster, including textures like pebble and quartz, every 3 to 7 years.
- Resurface cement pools every 3 to 7 years.
- Resurface fiberglass pools every 15 to 30 years.
Part of the responsibility of owning a pool is being observant. Maintenance can be expensive the longer you wait, so be prepared and know your pool’s status at all times. If you see peeling plaster, chalky residue, or rough spots, you may need resurfacing in the near future. It’s important to take this seriously, so your pool can go on providing fun, comfort, and memories for years to come.
Signs Your Pool May Need Resurfacing
Because it’s such a big task, you may be tempted to put off your pool resurfacing job. Unless you’re swimming every day, your pool is probably not the first thing on your mind, so it can be easy to let it fall by the wayside and neglect pool maintenance.
But there are five signs that it’s time to resurface your pool, so read on to learn about them all. You may save time, money, or your pool surface itself.
#1. Peeling Plaster or Chalky Residue
Plaster-peeling, also known as “spalling,” may show up on the floor or steps of your pool. Peeling happens due to low pH or calcium levels and can be difficult or impossible to repair once the pool plaster has peeled away.
A chalky, cloudy residue near the pool’s edges is a sign the surface is breaking down. They’re both causes for concern — you should contact a pool contractor to resurface as soon as possible.
#2. Stains That Won’t Come Out
Stains you can’t wipe off can be the earliest sign of problems with your pool’s surface. These stains can mask other issues, like small cracks or algae, so be careful with even small stains.
Acid-based pool cleaners may help, but using that to clean up stains requires extreme caution — you may damage the surface to the point that resurfacing becomes necessary. Get an expert opinion to make sure your stains aren’t hiding an even bigger issue.
#3. Rough Spots on the Pool Floor
Rough areas may appear on the pool floor as its surface wears down. These come from imbalances in your pH levels or other chemicals in the water. You’ll want to address this as soon as possible, as it can be a safety issue. The first thing to do is check your pool’s pH so you know what you are dealing with, then call a pool service company.
#4. Large or Small Cracks
Cracks can result from temperature changes and may appear in a spiderweb or cracked-eggshell formation.
Cracks only get bigger over time, so you want to take care of them right away. But what if they’re already big? Bigger cracks could be structural, which could mean lasting damage.
You may need to resurface the pool or even get down into the structure for deeper repairs. Contact a pool contractor to inspect your pool cracks and determine the best solution.
#5. Drop in Water Level
A sudden drop in the water level of your pool may signal a leak. This could be due to bad fittings or “plaster fatigue.” You may also have cracks you can’t see yet, or there may even be a problem with your construction itself. Get an expert’s advice right away. The last thing you want is a leak you can’t see, worn-out plaster, or the other problems this symptom may indicate.
Can You Resurface Your Own Pool?
While DIY pool resurfacing is possibe, the price of doing it incorrectly the first time can be high. If you end up with leaks or other minor construction issues, you may need to redo the whole process again from the beginning.
It will take at least two people and 20+ hours to resurface a medium-sized pool. You’ll need to work quickly and efficiently to ensure it doesn’t set too quickly while you’re working.
It can take a week to resurface a pool yourself — sometimes twice that, depending on the weather.
That’s a big DIY project for anyone to take on, so rely on an experienced pool contractor like Clements Pool Services instead.
Call Us for Pool Resurfacing
If you’re looking for a pool resurfacing expert or wondering how often should you resurface a pool, look no further than the pool professionals at Clements Pool Services and Remodeling. We are a full-service pool company in Eustis, here to help with your pool repair, resurfacing, and remodeling needs. We can advise you on the best time to resurface and get the job done efficiently.
If you see any cracks in your pool plaster, cement, or fiberglass, call us right away. Pool owners know that small problems can become big ones very quickly — so call (352) 735-4878 to speak with our Clements Pool Services team about pool resurfacing.